Studio 800 Wine Cooler 94 Bottle #36653

Placement requirements: 60-85F ambient temperature. If the ambient temperature is outside this range, the performance of the unit will be affected.

Size: 23 3/4w x 29 1/2d (with handle) 27d (without handle) x 48h (in)

Shelving: 9 pull-out shelves (7 rolling)

Quiet Mode The wine cooler can be put into "quiet mode", which reduces the fan speed by 20-25% and reduces the amount of noise produced by the fans, by pressing and holding the light button (while the display panel is locked from not being touched for 15 seconds) for about 3-5 seconds. The C/F indicator will flash when the unit is in "quiet mode."

IWA Exclusive! This advanced-engineered single-zone wine cooler allows you to control the temperature with a digital LED display, and features a stainless steel door and front-vented design for built-in or standalone installations.

• 94 Bottle Capacity (based on Bordeaux bottles - larger bottles will reduce capacity)
• Sliding wire shelves will accommodate a variety of bottle shapes and sizes
• Temperatures are displayed on the blue LCD display panel inside the cooler
• The stainless steel door has fingerprint-proof coating and reversible hinges
• The glass in the door is double-pane, tinted and tempered
• The wine cooler is front-vented to accommodate standalone and under-the-counter built-in installations
• Replaceable charcoal filter maintains clean air
• Interior LED lighting, security door lock and key are included with every unit
• Uses the most advanced, energy-efficient R600a compressor
• Choice of Fahrenheit/Celsius display
• UL / ETL compliant
• CEC and DOE energy compliant

Brand: Studio

UPC: 077757366536

Size: 23 3/4w x 27d x 48h (in)
*Not including the handle (2 1/2" D)

Weight: 190 lbs

Power/Rating:
115V / 60Hz; Requires 15-Amp Dedicated Circuit

Capacity: Up to 94 bottles

Material: Stainless-Steel

Warranty:
1-year warranty on parts and labor, and 5 years on the compressor

Studio 800 Manual

PLACEMENT REQUIREMENTS

• This appliance is designed for free standing installation or can be recessed into cabinetry.
• The wine cellar should be placed in a location where the ambient temperature is between 60-85°F. If the ambient temperature is outside this range, the performance of the unit may be affected.
• Place your wine cellar on a flat, solid floor that is strong enough to support it when it is fully loaded. To level your wine cellar, adjust the front leveling leg at the bottom of the wine cellar.
• When moving your wine cellar, please do not incline it more than 45 degrees.
• Locate the wine cellar away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
• Avoid locating the unit in damp areas.
• Plug the wine cellar into a dedicated (for this appliance only), properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (grounding) prong from the power cord. Any questions concerning power and/or electrical grounding should be directed to a certified electrician or authorized product service center.