CellarPro Air Handler 3kW Heater AH12-24Sx #32034
For wine cellars that are unheated and exposed to conditions below 55F temperatures, CellarPro Air Handlers can be configured with optional integrated heaters to provide 3000 Watts (10236 BTUH) of heat.
Air Handler heaters are completely integrated with and controlled through the digital control panel. The system automatically adds heat or refrigeration based on the temperature inside the cellar.
A safety thermostat provides additional protection from overheating inside the wine cellar. ETL approved to UL standards.
Please note: Heaters must be installed in the factory. Integrated heaters cannot be retrofitted. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.
Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).
CellarPro Air Handler 3kW Heater (P/N AH3kW). CellarPro integrated heaters are designed to be work exclusively with all Air Handler AH12-24Sx refrigeration systems from CellarPro.
- Provides up to 3000W / 10236 BTUH of heat
- Configured to be fully integrated with Air Handler cooling units
- Automatic temperature control
- Includes safety thermostat to avoid overheating
- ETL approved to UL standards
Brand: CellarPro
UPC: 077757320347
Size: 11h x 9 1/4w x 6d (in)
Weight: 5 lbs
Power/Rating:
208-240V / 1PH / 60HZ
3000W / 12.5 Amps
BTUH: 10236
Warranty:
1 Year
Click on the following link for more information:
Owner's Manual
DID YOU KNOW?
Nobody protects your wine cellar better than CellarPro Cooling Systems! In the event your cooling unit fails and the failed components are covered by our warranty, we'll send a replacement cooling unit to you per the terms of our Replacement Unit Program
CellarPro Replacement Unit Program
If your CellarPro cooling unit fails and the parts that failed are still covered by warranty, we'll send a replacement cooling unit to you, as follows:
- Your cooling unit must be registered at CellarPro
- Your cooling unit must have been properly sized, installed and maintained
- Your cooling unit may not have been permanently modified, damaged or disfigured
Please note:
- Replacement units are factory-refurbished cooling units with a similar build date as your original unit
- You are responsible for the shipping cost to send the replacement unit to you and return the original unit to us, and the cost (if any) to remove the original unit and install the replacement unit
- In order to send a replacement unit, we require a deposit, which will be refunded minus shipping costs upon the return and pending the inspection of the original unit
- If the original unit failed due to improper intallation or use, the failure is not covered by warranty and we will deduct the cost of the repairs from the refund of your deposit